Rather have a pro do it for you?
| Tools and Supplies to use tree bands to trap spotted lanternflies | ||||
|---|---|---|---|---|
| 1 | Tree Bands | |||
| 2 | Scissors | |||
| 3 | Gloves | |||
| 4 | Bucket | |||
| 5 | Paintbrush | |||
| 6 | Ziplock bags | |||
| 7 | Marker pen | |||
| 8 | Tape measure | |||
| 9 | Spray bottle | |||
| 10 | Insecticide spray | |||
How to use tree bands to trap spotted lanternflies
Effective Tips: Trapping Spotted Lanternflies with Tree Bands
Spotted lanternflies are an invasive species that can cause significant damage to trees and crops. One effective way to control their population is by using tree bands. In this article, we will guide you through the step-by-step process of using tree bands to trap spotted lanternflies.
Step 1: Choose the Right Time
The best time to install tree bands is in the late fall or early spring when the spotted lanternflies are in their nymph stage. This is when they are most vulnerable and likely to be traveling up and down the tree trunks.
Step 2: Clean the Tree Trunk
Before installing the tree bands, it is essential to clean the tree trunks thoroughly. Use a stiff brush or scraper to remove any dirt, debris, or loose bark that may interfere with the adhesive properties of the tree bands.
Step 3: Apply the Tree Bands
Unroll the tree bands and wrap them around the tree trunk, making sure to overlap the ends. The tree bands should be installed at eye level, which is typically around four to five feet from the ground. Use a staple gun or tacks to secure the tree bands in place.
Step 4: Apply the Sticky Substance
Once the tree bands are installed, apply a sticky substance to the bands. This will trap the spotted lanternflies as they crawl up and down the tree trunk. There are many different types of sticky substances available, including Tanglefoot, which is a popular and effective option.
Step 5: Monitor and Replace the Tree Bands
Check the tree bands regularly to monitor their effectiveness. If the tree bands become filled with spotted lanternflies or other insects, replace them with fresh bands. It is essential to keep the tree bands clean and sticky to ensure their effectiveness.
Step 6: Dispose of the Trapped Insects
Once the tree bands have trapped the spotted lanternflies, it is essential to dispose of them properly. Use a pair of gloves to remove the insects from the tree bands and place them in a sealable plastic bag. Dispose of the bag in the trash or bury it in the ground.
In conclusion, using tree bands to trap spotted lanternflies is an effective and environmentally friendly way to control their population. By following these simple steps, you can help protect your trees and crops from the damage caused by these invasive pests.
